welcomeJiaxing Siren Machinery Co.Ltd
PRODUCT
Features:
Standard model, lower cost,
digital contour detector.
Equipped with standard no guide head roughness detector.
Integrated instrument for roughness, wide range contour measurement.
Technical Specification:
| Model No. | CBPR1000 | CBPR2000 | |
| Column | Range | 320 ~ 620 mm | |
| Drive unit | Range | 100 ~ 200 mm | |
| Indicating accuracy[1] | ± (1+2L/100) μm | ± (0.8+2L/100) μm | |
| Straightness[2] | ≤0.8 μm / 100 mm | ≤0.5 μm / 100 mm | |
| Contour Detector | Range | 0 ~ ± 20 mm | |
| Indicating accuracy[3] | ± (1.3+6 |H| /100) μm | ± (0.6+5 |H| /100) μm | |
| Resolution | 0.01 ~ 0.2 μm | ||
| Roughness Detector | Range | ± 300 μm | ± 500 μm |
| Range resolution ratio | 1:65536 | 1:262144 | |
| Indicating accuracy | ≤ ± (7nm+ 3.5%) | ≤ ± (5nm+ 3.5%) | |
| Repeatability[4] | 1σ≤2 nm | 1σ≤1 nm | |
| Contour Accuracy | Arc[5] | ≤ ± (2+ R/8) μm | ≤ ± (1.5+ R/12) μm |
| Angle[6] | ≤ ± 2' | ≤ ± 1' | |
| Roughness Accuracy | Residual noise[7] | ≤ 10 nm | ≤ 5 nm |
| Drive Speed | X axis (horizontal direction) | 0.1 ~ 10 mm/s | 0.05 ~ 15 mm/s |
| Z axis (column) | 0.5 ~ 10 mm/s | 0.2 ~ 15 mm/s | |
| Contour Measurement Function | Workpiece surface line feature, point feature, distance between points,distance between lines. Position accuracy of each features,including distance,parallelism,verticality,angle,groove depth,groove width,radius,anslysis for straight line accuracy,convexity and contour. | ||
| Roughness Measurement Function | Roughness Function:Ra, Rp, Rv, Rz, Rz(jis), R3z, RzDIN, Rzj, Rmax, Rc, Rt, Rq, Rsk, Rku, Rsm,Rs, R△q, Rk, Rpk, Rvk, Mr1, Mr2, Rmr Waveness Parameter:Wa, Wt, Wp, Wv, Wz, Wq, Wsm, Wsk, Wku, WmrOriginal Contour Parameter:Pa, Pt, Pp, Pv, Pz, Pq, Psm, Psk, Pku, Pmr | ||
[1]: (L: measuring length)
[2]: (λc is 2.5mm, optical flat sampling speed≤0.3mm/s.)
[3]: (H: measuring height)
[4]: (measuring with square wave standard gauge block, Ra is 0.35 ~ 0.5μm.)
[5]: (R: standard ball, 2mm＜R＜10mm,sampling arc angle is 120°.)
[6]: (60° and 90° angle block gauge,sampling angle edge length is 5mm.)
[7]: (λc is 0.08mm, optical flat sampling speed 0.1mm/s.)
Application:
